Z1601A Base Polyol Polyester Polyol for Rigid PIR Foam

• Molecular Principal Chain: Carbon Chain Polymer
• Color: Light Yellow Transparent Viscous Liquid
• Transport Package: 240kgs/Drum
• Specification: PA, AA, DEG synthetic
• Trademark: JINGJU
• Origin: China
• Model NO.: Z1601A
• HS Code: 3907999990
• Production Capacity: 100kt/a

Product Description

 

General description

Z1601A is a special polyester polyol based on PA,AA and DEG, specially developed for production of rigid polyurethane foams, especially PIR, as well as semi-rigid and molded foams.

Main advantage

• Low hydroxyl value, good flowability, good toughness and moderate strength.
•low viscosity, good compatibility with blowing agent.

Major application


Specification

• Rigid polyurethane foam, PIR system.;
• Molded products and semi-rigid foam systems;
 

Items	Spec
OHv [mgKOH/g]	160±8
Water content [%]	max. 0.15
Viscosity (25°C) [cps]	2700-3300
Acid value [mgKOH/g]	1.0~2.0
Color [APHA]	max. 150
Density (25°C) [g/cm^3]	1.21-1.22

Package

 240KG/steel drum,1000KG/IBC,20tons/iso-tank or as per request.

Storage

Suggested temperature	15-30°C
Shelf life (in a sealed container)	6 months

Safety

Z1601A is polyester polyol based chemicals, it may cause slight to moderate irritation on direct contact with the skin, eyes and mucous membranes, particularly if contact is prolonged.
Safety goggles and impermeable protective gloves should always be worn if there is a risk of direct exposure when handling this product.
Splashes in the eyes should be removed immediately by careful flushing with copious amounts of water. If irritation persists, medical attention should be obtained.
Splashes on the skin should be wiped off immediately, after which the contaminated areas should be thoroughly washed with soap and water. A good barrier cream should then be applied.
Contaminated clothing should be removed immediately to prevent further skin contact and thoroughly cleaned before reuse. The product should be kept away from food, drink and tobacco.
Further technical information relating to safety can be found in the Safety Data Sheet.

 

Company Profile

With over 20 years technical and production experience accumulation in polyurethane rigid foam industry,especially we have core technical on high flame resist (B1 class)rigid PIR/PUR sandwich panel,from base polyol to blended polyol system,this enable us having lead position in this specific rigid PU foam industry. Based on above team set up Jingju company in March,2023.

We Focus on:

1. Based polyols like polyether polyol, polyester polyol and FR polyol development and production.
2. PU system applications development, production, sales and technical service.

major applications are thermal insulation for appliance, solar/electric water heater, panel, spray, pipe, also wood-imitation, etc.

We are confident to provide you with most suitable solution in the field of PU rigid foam.