J-4110 Sucrose Initiated Polyether Polyol for PU Rigid Foam

• Customization: Available
• Molecular Principal Chain: Carbon Chain Polymer
• Color: Colorless to Yellowish Transparent Viscous Liquid
• Model NO.: J-4110
• Transport Package: 200kgs/Drum
• Specification: sucrose initiated
• Trademark: JINGJU
• Origin: China
• HS Code: 3907299090
• Production Capacity: 100kt/a

Product Description

General description

J-4110 is a sucrose initiated polyether polyol with functionality around 4.5, and molecular weight around 560. It is a typical polyether polyol for rigid polyurethane foam, widely used in refrigerators, freezers, panels, waterproof and thermal insulation, etc. 

Main advantage

• Good flowability
• High functionality, Good foam stability
• Good demolding properties

Specification

 

Items	Spec	Test standard
OHv [mgKOH/g]	420-460
Water content [%]	max. 0.15
Viscosity (25°C) [cps]	3000-5000
Acid value [mgKOH/g]	-
Color [Gardener]	max. 8
K^+ content [ppm]	-

Package

 200KG/steel drum,1000KG/IBC,20tons/isotank, or as requested.

Storage

Suggested temperature	15-25°C
Shelf life (in a sealed container)	6 months

Safety

JS-4110 is polyether polyol based chemicals, it may cause slight to moderate irritation on direct contact with the skin, eyes and mucous membranes, particularly if contact is prolonged.
Safety goggles and impermeable protective gloves should always be worn if there is a risk of direct exposure when handling this product.
Splashes in the eyes should be removed immediately by careful flushing with copious amounts of water. If irritation persists, medical attention should be obtained.
Splashes on the skin should be wiped off immediately, after which the contaminated areas should be thoroughly washed with soap and water. A good barrier cream should then be applied.
Contaminated clothing should be removed immediately to prevent further skin contact and thoroughly cleaned before reuse. The product should be kept away from food, drink and tobacco.
Further technical information relating to safety can be found in the Safety Data Sheet.

Company Profile

With over 20 years technical and production experience accumulation in polyurethane rigid foam industry,especially we have core technical on high flame resist (B1 class)rigid PIR/PUR sandwich panel,from base polyol to blended polyol system,this enable us having lead position in this specific field of rigid PU foam industry. Based on above, our team set up Jingju company in March,2023.

We Focus on:

1. Based polyols like polyether polyol, polyester polyol and FR polyol development and production.
2. PU system applications development, production, sales and technical service. Major applications are thermal insulation for appliance, solar/electric water heater, panel, spray, pipe, also wood-imitation, etc.

We are confident to provide you with most suitable solution in the field of PU rigid foam